Notice: The info below is not item specific.
George Risk Industries
Undetected water damage, such as that caused by leaking pipes or corroded water heaters, cost homeowners tens of thousands of dollars each year. Such repairs are time consuming and costly to correct. Applications could include computer room sub-floor areas, telephone equipment rooms, bathrooms, laundry rooms, any areas adjacent to a water storage tank or piping. Also evaporative air conditioners, drip pans, overflows and/or drains. Using no mechanical parts, the GRI water sensors are triggered by a moisture bridge across the sensor contacts. The GRI water sensors can be installed to detect a layer of water a minute as 1/16 of an inch in depth. Requiring only two wires for signal and power, the GRI 2800 water sensor utilizes and open collector electronic trigger. The sensor stimulates a simple dry closure. It can be used to activate a remote signaling device or it can be wired directly to most alarm panels and some wireless transmitters. The GRI water sensors will continue to protect against troublesome and costly water leaks for years to come.
Features:
Will detect any conductive non-flammable liquid
Ideal anywhere water damage could occur
Automatic reset
6 foot jacketed lead standard
Custom lead length available
For maximum protection we recommend using the 2600 4-wire sensor
Specifications
Specifications for George Risk Industries GRI2800-G
Other Specs
Alternate Codes124492, 2800-G, 2800G
CategoryAccess Control, Alarms & Intercom, Burglar Alarms, Switches, Sensors & Contacts
Part TypeDetectors
StyleWater Sensor
Manufacturer: George Risk Industries | Part#: GRI2800-G
Ordering note: Use Hot# 124492 when placing orders.
