Lifesafety Power Inc
Mercury unified power systems combine system power, lock power and distribution alongside Mercury Security LP series access hardware in one compact and secure UL listed solution. Solutions are available from 2 to 24 doors, in single or dual voltage, standard or network managed. MCLASS unified power systems combine Flexpower power modules alongside Mercury Security access hardware in one compact and secure UL listed solution. This unit is a 12V and 24V DC dual voltage access power system. Dual C8 lock control modules provide sixteen access control inputs capable of voltage or dry contact activation, and sixteen outputs programmable for failsafe / fail secure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO. Dual D8 modules provides sixteen auxiliary class II outputs and each output is configurable for 12 or 24VDC operation. MCLASS enclosures are painted steel with removable backplate and include lock, two (2) keys and tamper switch.
Features:
FPO offline power supply:
120 or 230 VAC input
12 and 24 VDC outputs
On board fire alarm interface
Continuous and resettable DC
Distributed outputs module:
Sixteen auxiliary, class II power limited at 2.5A each
Sixteen controlled, fused at 3A each
Expansion options:
Increased power, multiple voltages
Additional distribution outputs
Network monitoring and reporting
Labor saving design:
Pre-wired power section
Pre-punched knockouts
Removeable backplate simplifies installs
Pre-defined hole pattern for power section
Access panels mount on threaded standoffs – no drilling required
Additional benefits:
Wire management room
6.5″ enclosure depth fits battery set
Tamper switch, lock, dual key set standard
Mounting hardware for access boards included
Specifications:
Input Power:
Input 120/230 VAC 50/60 Hz | 452 Watts
Overload and short circuit protection
Over temperature protection
Polarized AC power supply disconnect
Output Power:
FPO150: 12V/12A or 24V/6A | 150 Watts
FPO250: 12V/20A or 24V/10A | 250 Watts
Outputs: Continuous (DC1) Resettable (DC2)
16 control outputs, fused at 3A each
16 auxiliary outputs, class II power limited at 2.5A each
120 mV output voltage ripple
System Efficiency: 87% | System BTU Rating: 175 BTU/Hr
Battery Charging:
Independent built-in 2A charger for sealed lead acid or gel type batteries
Microprocessor dual rate charging of 12 or 24 V battery sets
Charges up to 80Ah battery sets within UL limit
Automatic switchover to standby battery when AC fails
Zero voltage drop when switched over to battery backup
Supervision: AC Fail (form “C” contacts). System fail (form “C” contacts) may be triggered by low/no battery, short to earth ground and power supply failure
Visual Indicators:
AC input, DC1 and DC2 output
System fault | AC fault | Short to earth ground | Reverse battery polarity
Fire alarm input activated
C8: DC input/output and fault
D8P: DC outputs
Enclosure Dimensions: Size: 36.00H x 30.00W x 6.50D in. (91.00 x 76.00 x 16.50 cm) | Weight: 80 lbs.
Specifications for Lifesafety Power Inc LSIFPO150/250-2C82D8PE8M2
Other Specs
Alternate CodesFPO1502502C82D8PE8M2, FPO150/250-2C82D8PE8M2
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
