Notice: The info below is not item specific.
Lifesafety Power Inc
Mercury Unified power systems combine system power, lock power and distribution alongside Mercury Security LP series access hardware in one compact and secure UL Listed solution. Solutions are available from 2 to 24 doors, in single or dual voltage, standard or network managed. MCLASS unified power systems combine Flexpower power modules alongside Mercury Security access hardware in one compact and secure UL listed solution. This unit is a 12V and 24V DC dual voltage access power system. C8 lock control module provide eight access control inputs capable of voltage or dry contact activation and outputs programmable for failsafe / fail secure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO. D8 module provides eight auxiliary class II outputs and each output is configurable for 12 or 24VDC operation. MCLASS enclosures are painted steel with removable backplate and include lock, two (2) keys and tamper switch.
Features:
FPO offline power supply:
120 or 230 VAC input
12 and 24 VDC outputs
On board fire alarm interface
Continuous and resettable DC
Distributed outputs module:
Eight auxiliary – class II at 2.5A each
Eight lock control – fused at 3A each
Expansion options:
Increased power, multiple voltages
Additional distribution outputs
Network monitoring and reporting
Labor saving design:
Pre-wired power section
Pre-punched knockouts
Removeable backplate simplifies installs
Pre-defined hole pattern for power section
Access panels mount on threaded standoffs – no drilling required
Additional benefits:
Wire management room
6.5″ enclosure depth fits battery set
Tamper switch, lock, dual key set standard
Mounting hardware for access boards included
Specifications:
Input Power:
Input 120/230 VAC 50/60 Hz | 170 Watts (1.41 Amps)
Overload and short circuit protection
Over temperature protection
Polarized AC power supply disconnect
Output Power:
4A@12V and 4A@24V DC, 150W maximum combined output power
Outputs: Continuous (DC1) Resettable (DC2)
8 auxiliary outputs, fused at 3A each
8 control outputs, fused at 3A each
120 mV output voltage ripple
System Efficiency: 88% | System BTU Rating: 66 BTU/Hr
Battery Charging:
Independent built-in 2A charger for sealed lead acid or gel type batteries
Microprocessor dual rate charging of 12 or 24 V battery sets
Charges up to 80Ah battery sets within UL limit
Automatic switchover to standby battery when AC fails
Zero voltage drop when switched over to battery backup
Supervision: AC Fail (form “C” contacts). System fail (form “C” contacts) may be triggered by low/no battery, short to earth ground and power supply failure
Visual Indicators:
AC input, DC1 and DC2 output
System fault | AC fault | Short to earth ground | Reverse battery polarity
Fire alarm input activated
B100: DC input/output and fault
C8: DC output and fault
D8P: DC outputs
Enclosure Dimensions: Size: 30.00H x 23.00W x 6.50D in. (76.00 x 59.00 x 16.50 cm) | Weight: 45 lbs.
Specifications
Specifications for Lifesafety Power Inc LSIFPO150-B100C8D8PE6M
Other Specs
Alternate CodesFPO150-B100C8D8PE6M, FPO150B100C8D8PE6M
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
Manufacturer: Lifesafety Power Inc | Part#: LSIFPO150-B100C8D8PE6M
Ordering note: Use Hot# 200130 when placing orders.
