4 Output Lock Distribution Module, Class 2 Power Limited, Required by Code for Oregon and Washington

$85.69

4 in stock

SKU: LSIC4P-BOXED Category:

Notice: The info below is not item specific.
Lifesafety Power Inc
The Flexpower C4, C8 lock controller modules add either 4 or 8 lock control outputs to a Flexpower power supply and are typically supplied as part of a system or purchased as an expansion piece to an existing system. Each module provides either 4 or 8 access control inputs capable of voltage or dry contact activation. Each module provides either 4 or 8 lock outputs, each one programmable for fail-safe, fail-secure, dry contact, and fire alarm over ride for egress lock control. In dual voltage systems, each lock output is also programmable to either of the two voltages available when used in a Flexpower dual voltage power system. Lock modules incorporate OutSmart technology – color changing output LEDs that visually indicate voltage level (Green for 12V, Blue for 24V). Each output is supervised for voltage and/or blown fuse with the fault reported to the host power supply.
Features:
Listed for fire alarm, intrusion, access control, CCTV and mass notification
Provides 4 or 8 trigger input zones for interface to an access control system
Provides 4 or 8 relay controlled output zones
Accommodates failsafe or fail secure locking devices
Provides fire alarm interface for egress lock control
Monitors fuse integrity of output zones and reports fault to host power supply
Status LEDs report zone activity
Each output zone is fused at 3A or 2.5A for PTC circuit breakers
PTC versions are low voltage, class 2 power limited
Allow selection by zone from two voltage sources pre-punched cabinet layout allows expansion board additions with minimal labor
Easily obtainable and replaceable automotive style ATM fuses
Functions:
Flexibility:
Multiple outputs for direct lock control and additional accessory power distribution modules
Color coded by function configuration jumpers for ease of programming
Configurable fail-safe, fail-secure, and dry contact modes of operation
Fire Alarm Interface (FAI) when used with an FPO power supply
Fault detection and reporting to host power supply
FlexConnect dual buss architecture
OutSmart color changing output LEDs indicate 12 or 24VDC setting
Output Protection:
C4/C8 ATM style fuse: 3A/per output
C4P/C8P Solid state circuit breaker: 2.5A/per output
Visual Indicators:
Output status per output (locked/unlocked)
DC voltage per output (green LED for 12VDC | blue LED for 24VDC)
Fault (yellow LED)
Mechanical:
Multiple modules can be daisy chained to add additional outputs
Snap-in style mounting standoffs with fast-on connect cables for easy field installation
Lifetime Warranty: High efficiency circuit of greater than 90% provides less heat generation leading to a longer service life and lower MTBF

Specifications

Specifications for Lifesafety Power Inc LSIC4P-BOXED
Other Specs
Alternate CodesC4P, C4P-BOXED, C4PBOXED, LSIC4P
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies

Manufacturer: Lifesafety Power Inc   |   Part#: LSIC4P-BOXED

Ordering note: Use Hot# 170042 when placing orders.