Notice: The info below is not item specific.
Lifesafety Power Inc
LifeSafety Power has an expansive range of power supply boards for access control applications. The FPO series is LifeSafety Power’s flagship line of power supplies. Full-featured with US & International regulatory listings, the FPO series is applicable in most applications.
Features:
VSelect – One single switch for configuring the output between 12 and 24VDC eliminates field errors and allows for the reduction and simplification of service inventory by eliminating the necessity of stocking units in each voltage.
TruWatt – Output power capability of the power supply remains constant regardless of the output voltage setting. For example, a Flexpower 250 watt supply will provide 10 amps at 24VDC and 20 amps at 12VDC, allowing the same number of locking devices to be used at either the 12 or 24V setting.
SureCharge – The microprocessor controlled constant current charging process used by the FPO power supply guarantees proper charging current for the battery and the fastest charge time without stress or damage to the battery.
FlexConnect – Power supply and accessory board interconnection system uses common mounting footprints, predrilled mounting holes, snap-in standoffs, pluggable wires, and a dual buss distribution architecture to simplify installation and service.
Datalink – Key power functions are monitored and reported through PC or browser interface with the PowerCom management software.
GreenSmart – Flexpower systems are RoHs compliant, lead-free, and meet the latest state, federal and European requirements for energy efficiency.
Specifications:
Input: FPO75, FPO150, FPO250 : 110VAC ±10%, 50/60Hz
Outputs:
DC1 output continuous
DC2 output switched on FAI Input
Overload & short circuit protection with auto-restart
Battery Backup:
Built-in microprocessor controlled smart charger
Charges Sealed Lead Acid (SLA) or Lithium Iron Phosphate
Auto switchover to battery with zero transfer time
Integrated low battery cutoff
Supervision:
AC fail, battery fail, system fault (form “C”)
Low power shutdown when battery voltage too low
Fire Alarm Disconnect Activation:
DC voltage: 9 to 33VDC, 3 to 15mA
Dry contact NO/NC
Optional Fire Alarm latching
LED Visual Indicators: AC input, DC output, system faults, fire alarm activation
Specifications
Specifications for Lifesafety Power Inc LSIFPO75-BOXED
Other Specs
Alternate CodesFPO75-BOXED, FPO75BOXED
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
Manufacturer: Lifesafety Power Inc | Part#: LSIFPO75-BOXED
Ordering note: Use Hot# 200137 when placing orders.