Napco Security Alarm
Gemini P9600 powerful multi-tasking hybrid control panel – feature-rich for security applications and home automation integration.
Features:
8 End-of-line-resistor burglary zones programmable for area, exit/entry delay, interior, follower, day zone, chime, fire option, sensor watch, swinger shutdown, zone ANDing and a variety of other features
Up to 96 zones with optional zone-expansion modules and 4-zone keypads
Including up to 8 2-wire fire zones
Up to 96 individually coded users, each with a programmable authority level
Exclusive RS232 panel-port supports PC home automation/ networking integration for 9600 baud comprehensive communications
3 On-board relay outputs; expandable to 96
Three keypad panics: fire, police and auxiliary
Up to 8 independent area partitions
Up to 8 separate access stations by up to 96 users
Up to 64 separately-addressable X-10 devices with the GEM-X10 kit
English-language prompts and system status messages from choice of keypad models
User-customized zone descriptions, reprogrammable as required
Supports 2-wire and 4-wire smoke detectors
Reports alarms, restores and troubles by zone
255 Event schedule
800 Event log
Overview mode permits monitoring and control of total system from one keypad
Supports up to 4 RF receivers
Guard-tour programmable for start time, tour length, and check points (tour stations)
2 Programmable entry delay times
2 Interior-bypass groups
Dynamic battery test interrupts charging and places battery under load every four hours
Chime by zone; programmable duration
Non-volatile RAM retains memory during power losses
Quick loader programmable
Auto-download log
Exclusive V.A.L.I.D. feature (verifying automatic line integrity diagnostic) reduces false alarms due to changes in line resistance
Specifications:
Operating temperature: 0-49ºC (32-120ºF)
Input power: 16.5Vac via class 2 plug-in 40VA transformer, supplied
Loop voltage: 10-13VAC
Loop current: 2.5mA with 2.2ohm end-of-line resistor (model EOL2.2K); 5mA for 2-wire smoke detector zones
Loop resistance: 300W max.; 50W for 2-wire smoke detector zones
Relay outputs (burglary; reset; aux): wet, 12Vdc, 1.2A max.; Dry (cut related jumper for dry contacts), SPDT contacts 24Vdc, 2A, 0:6 PF
Auxiliary power output: 12Vdc regulated
Remote power output: 12Vdc regulated (for keypads)
750 mA combined standby current remote power + aux. power + reset relay power
Standby time: residential fire/burglary & commercial burglary, 4 hours minimum
EZM module: GEM-EZM8: input, 50mA (including PGM output) PGM output: 5mA, 12V special application
Keypad current: GEM-RP1CAE2: 100mA; 35mA if back lighting is disabled (cut W1, W2 & W3) PGM output: 5mA, 12V special
Specifications for Napco Security Alarm NAPGEM-P9600
Other Specs
Alternate Codes115696, GEM-P9600, GEMP9600
CategoryAccess Control, Alarms & Intercom, Burglar Alarms, Control Panels/Keypads
Part TypeControl Panel
