Notice: The info below is not item specific.
Lifesafety Power Inc
The Flexpower FPO75-E1 is an offline switch mode power supply-battery charger specifically designed for the lifesafety industry. Capable of providing two power outputs, user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. Complete fault detection and reporting, with programmable fault delays, is provided along with datalogging capability of fault occurrence, battery usage time and current power supply status. Single, dual, and multi-voltage power systems in enclosures for simple requirements or for expansion with LSP accessory boards. Multiple enclosure sizes available. Each FPO power supply provides one pair of outputs, user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output of a pair provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. Models with a B100 provide dual voltage output with a single AC connection. Flexpower accessory boards can be added to a Flexpower system in ANY combination based on job requirements and system retains its complete agency listing.
Features:
Fully modular power management system
Multiple outputs for system power, direct lock control and accessory power distribution modules
Fire alarm interface for egress lock control (FAI)
Configurable fail-safe / fail-secure modes of operation
Comprehensive fault detection and reporting including optional earth ground and battery presence
AC and System fault output relays can be delayed via PowerCom
Microprocessor dual rate charging restores battery sets from 4 to 40 amp hours
Specifications:
Input Voltage: 120/230 VAC
Input Power (max): 85 Watts
Output Voltage: 12 or 24 VDC
Output Current: 6 or 3 Amps
Battery Charge Capacity: 40Ah
Efficiency: 83%
Output Ripple: 120 mVp-p
Line Regulation: 0.1 ±%
Load Regulation: 2 ±%
BTU Rating: 33 BTU/Hr
Continuous Power Outputs: 1
Switched Power Outputs: 1
Fire Alarm Interface: Yes
Specifications
Specifications for Lifesafety Power Inc LSIFPO75-E1
Other Specs
Access TypePower Supply
Alternate CodesFPO75-E1, FPO75E1, LSIFP075-E1, LSPFPO75-E1
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
Voltage/Amp Rating12 – 24V DC
Manufacturer: Lifesafety Power Inc | Part#: LSIFPO75-E1
Ordering note: Use Hot# 150966 when placing orders.
