Command Access
The PD25-M series is a motorized latch pullback grade 1 architectural exit device; made for use in all institutions and commercial buildings when heavy duty, fire and life safety operation is required. All PD25-M models are equipped with our patent pending push to set (PTS) technology. We know that door conditions change and in retrofit scenarios you never know exactly what you’re walking into. But with our PTS adjustment your post installation adjustment is greatly simplified in 5 quick seconds. Install this device with the confidence of knowing that the PD25-M meets or exceeds the high standards of other grade 1 products and carries our 3-year “no hassle “ warranty, meaning we will support you.
Features:
MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
“PTS”: 5 second electronic adjustment for easy post installation adjustment
Electric dogging rated for continuous duty – auto re-engage if push pad is pulled from dogged position
Low current draw – field switchable to “high torque” mode
Up to 300’ wire run with 2-18ga wire – long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel
8’ cable with quick connect for MM5 module to easily connect to power supply lead
Optional request-to-exit can be added
3-year “no hassle” warranty
“PTS” Push to set technology
Easy installation – fast, quiet, smooth
Retrofits Von Duprin 98/99 series exit devices
True electronic dogging – full push pad retraction
ANSI/BHMA A156.3 grade 1 heavy duty exit device
UL Listed for panic & ULC10C, UBC 7-2-1997 codes
Models:
PD25-M-RIM: Motorized latch retraction (EU)
PD25-M-SVR: Motorized latch retraction (EU)
PD25F-M-RIM: Motorized latch retraction (EU) – fire rated
PD25F-M-SVR: Motorized latch retraction (EU) – fire rated
PD26-RIM: Mechanical RIM device
PD26-SVR: Mechanical SVR device
PD26F-RIM: Mechanical RIM device – fire rated
PD26F-SVR: Mechanical SVR device – fire rated
Specifications:
Voltage range: – 24VDC +/- 10%
System Protection: Unit shutdown when voltage exceeds 28VDC
Standard: Average current peak: 900A, average current hold: 215mA
High Torque: Average current peak: 2A, average current hold: 250mA
PTS Adjustment: Approx. 1/4”
Weight: 14 Lbs
Materials: Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad. End caps are made of brass, bronze or stainless steel; rail travels in direction of the door swing.
Door Widths: dimensioned for 36” – 3.75” and 48” doors
Door Height: All devices are UL listed for panic and ULC10C, UBC 7-2-1997 codes. Single door: 48” x 96”. Double door: 96” x 96”
Hurricane Approved for Exit Device hardware: Florida building code FL 13922
Stile Width: 2-3/4” backset with center hub; minimum 4-1/2” stile required; optional 2-1/4” available.
Dogging: Electronic dogging only — no mechanical dogging available with electrified hardware.
Fasteners: all provided, thru-bolts included with all trim for extra security
Cylinders: not provided. Install rim cylinder by others.
Options: Mullions, strikes, less bottom rod, latch guards and pulls
Finishes:
626 – Satin chrome
613 – Oil rubbed bronze
Specifications for Command Access CMAPD25-M-EU24V-RIM-48-626
Other Specs
Alternate CodesCMAPD25-M-48-626, CMAPD25-M-48-RIM 626, PD25-M-EU24V-RIM-48-626, PD25MEU24VRIM48626
CategoryElectrified Exit Devices, Exit Devices & Exit Alarms
