Detex Corporation
The AO19 series automatic operator for single doors is an easy to install, heavy duty product for high use and high abuse low energy applications. The AO19 series meets requirements for ANSI/BHMA A156.19 (American National Standard for power assist and low energy power operated doors) and provides standard features that meet the requirements of the American Disabilities Act.
Features:
Economical operator provides safe and easy access in medium to high-traffic and security areas
Provides ADA compliant access to handicap applications
Quiet operation
115VAC power plug-in mounted in header
Hanger plate allows quick installation
Self-contained unit in an extruded case allows easy access for maintenance and adjustments
Works with existing access control, locking and computer signal devices
Easy manual use
Reduced service calls due to heavy-duty construction
3-way low-voltage on/off/hold switch for ease of service and setup
Can be installed and adjustments can be made prior to electrician connecting building power
Available in single, pair (twin) for independent, simultaneous and dual egress openings
Power close applies a reverse power to aid in latch check position. Must be selected to activate.
Single voltage source required to operate just able delayed activation for sequenced vestibule doors
Reverse on obstruction stalls a door during closing cycle and re-activates to open if an obstruction is sensed anytime before the latch position. Must be selected to activate.
Adjustable closing speed
Push & go (use for handicap) activates when door is manually pushed to open. Must be selected to activate.
Electric lock relay provides an adjustable delay before door opens to unlock an electric strike, maglock or other types of electric locks – prevents binding
Mechanical Options:
LH Push: Left hand push
RH Push: Right hand push
LH Pull: Left hand pull
RH Pull: Right hand pull
39.5″: Fits above most 36″ doors
45.5″: Fits above most 42″ doors
52″: Fits above most 48″ doors
Specifications:
Power Requirements: 115VAC 60 HZ 3 amps
Motor: 115VDC rectified, 1/8 hp, 60:1 gearbox
Module:
Activation input terminals
Form C lock switch terminals
Safety lock-out built in
17 additional features standard on board
Enclosure:
7″ h x 4-1/2″ d
Approximately 50 lbs
Aluminum extrusion
Push reveal depth up to 11″” with standard arm. Extended arm available.
Pull reveal depth up to 2-1/2”
Finishes:
AL – 204-Ri Clear: arch. class II anodized coating
BZ – 313-Ri Dark bronze: arch. class II anodized coating
Specifications for Detex Corporation DTXAO19-1 PUSH-LH AL
Other Specs
Alternate CodesAO19-1 PUSH-LH AL, AO191PUSHLHAL, AO19-1X39.5XLHXPUSHXAL, AO19-1XLH PUSHXAL, DTXAO19-1-LH-PUSH-AL, DTXAO19-1 X LH PUSH X AL, DTXAO19-1XLH PUSHXAL
Arm FunctionSimultaneous
CategoryDoor Closers, Door Operators, Power Operators
CertificationsA156.19, ADA, ANSI, BHMA, UL 325, UL Listed 3 Hour
Closer TypePower Operator
Device Width39.5″
Door ApplicationPower Operators
Door TypeSingle
Door Width36″
Finish ColorAnodized Aluminum, Clear
HandingLeft Handed
ManufacturerDetex Corporation
MaterialAluminum, Extruded
Maximum Door Weight300lbs
MountingPush Side
SeriesAO19 Series
Voltage115
Voltage TypeVAC – Alternating
