Command Access
The PD15-M series is a motorized latch pullback grade 1 storefront exit device; made for use in all institutions and commercial buildings storefront applications. All PD15-M models are equipped with our PTS “push to set” technology. As a retrofit for the Jackson 1285/95 & Kawneer 1686/1786 series models are designed to utilize the existing mounting locations and mortise or rod & case assemblies without having to remove the door. Install this device with the confidence of knowing that the PD15-M series meets or exceeds the high standards of other grade 1 products and carries our 3-year “no hassle” warranty, meaning we will support you.
Features:
Our motorized latch retraction is fast, quiet, and smooth!
MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
“PTS”: 1 second electronic adjustment for easy post installation adjustment
Electric dogging rated for continuous duty – Auto re-engage if pulled from the dogged position
Low current draw: Compatible with most 24VDC, 1.5A (or greater) regulated & linear power supplies
Up to 300’ with 2-18ga — long wire runs with provides installer with convenience of placing the locking device power supply in a centralized location; i.e. the same closet as the access panel
8” cable with Quick connect for MM4 module to easily connect to power supply lead
The slim, compact attractive low profile design enables mounting on narrow-style doors.
Maintains factory dogging
3-year “no hassle” warranty – longer than the traditional 1 year warranty because our stuff works!
Retrofits the Jackson 1285/95 & Kawneer 1686/1786 series exit devices
Motorized latch retraction w/ easy adjustment
Long wire runs w/18ga – no need for specialty power supply right above the door.
Models:
PD15-M-RIM: Complete rim device, non-handed, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
PD15-M-CVR: Complete CVR device, specify handing – LHR or RHR, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
Sub PD16: for mechanical devices
Specifications:
System protection: unit shutdown when voltage exceeds 28VDC
Standard: Average current peak: 900mA, average current hold: 250mA
PTS adjustment: approx. 1/4”
300’ Run w/ 18ga
Handing: Rim device is non-handed. CVR device is handed.
Door Thickness: Suits 1-3/4” standard
Projection: 2-5/8” when fully projected, 1-5/8”when dogged.
Stile Width: Minimum 2” stile. Fits narrow, medium, and wide stile aluminum doors.
Dogging: Standard dogging with hex key or cylinder dogging option. Electric dogging also available.
Fasteners: Standard self-tapping screws
Vertical Rods: Top and bottom steel rods for easy adjustment. Standard device is adjustable for nominal door heights
Push bar Length: Standard size: dimensioned for 36” and 48” openings. Standard width bars can be field cut to: 36/48” – 7” of filler plate needed
Accessories:
Request to Exit (REX): Switch available factory installed
Request to Exit Kit (PD15REXKIT-M-ED): Switch available for installation in the field
Specifications for Command Access CMAPD16-CVR-36-313-REX RHR
Other Specs
Alternate CodesPD16-CVR-36-313-REX RHR, PD16CVR36313REXRHR
CategoryCommercial Electric Locks, CVR Exit Devices, Electric Locks, Exit Devices, Exit Devices & Exit Alarms, Glass Aluminum Hardware, Lock Sets, Narrow Style Electric Locks, Narrow Style Panic Devices, Standalone/Pushbutton Locks