Command Access
The PD10-M series is a motorized latch pullback grade 1 storefront exit device that retrofits First Choice 3600/3700 & Dor-o-matic 1600/1700 series. All PD10-M models are equipped with our PTS “push to set” technology. We know that door conditions change and in retrofit scenarios you never know exactly what you’re walking into. But with our 1 touch PTS adjustment your post installation adjustment is a breeze. Install this device with the confidence of knowing that the PD10-M meets or exceeds the high standards of other grade 1 products and carries our 3-year “no hassle “ warranty.
Features:
Next Generation MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
“PTS”: 5 second electronic adjustment for easy post installation adjustment
Electric dogging rated for continuous duty – auto re-engage if push pad is pulled from dogged position
Low current draw – field switchable to a “low current” or “high torque” mode
Up to 300’ wire run with 2-18ga wire – long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel
6’’cable with robust quick Molex connect for MM5 module to 6’ power lead to easily connect to power supply
UL listed
3 Year no hassle warranty
Electric motor driven latch pullback
Quiet, fast, smart, & durable
Exact retrofit for Dor-o-matic 1600/1700 or First Choice 3600/3700
ANSI/BHMA A156.3 Grade 1 UL narrow stile storefront rim & CVR exit devices
Tested to 4 times industry standard – reliable & high performance exit devices
Models:
PD10-M-RIMA: Complete rim exit device, non-handed, motorized latch pullback, w/electronic dogging. Aluminum finish
PD10-M-RIMD: Complete rim exit device, non-handed, motorized latch pullback, w/electronic dogging. Duronatic finish
PD10-M-CVRA: Complete CVR exit device, non-handed, motorized latch pullback, w/electronic dogging. Aluminum finish
PD10-M-CVRD: Complete CVR exit device, non-handed, motorized latch pullback, w/electronic dogging. Duronatic finish
PD11-RIM: Mechanical RIM device
PD11-CVR: Mechanical CVR device
Specifications:
Operating Voltage: 24 TO 28 VDC
System Protection: Unit shutdown when voltage exceeds 28VDC
Standard: Average current peak 1.3A,
Average Current Hold: 180MA
Torque: Average current peak: 2A, average current hold: 250MA
PTS Adjustment: Approx. 1/4”
Materials: push bar made of extruded aluminum, anodized in finish specified.
Push bar Length: dimensioned for 36” and 48” doors.
Door Height (for CVR): 7’ standard; designate 8’ or 9’ optional height when ordering
Door thickness: suits standard 1-3/4” thick aluminum, stile and rail doors
Stile Width: Minimum 2” stile required. Fits medium and wide stile doors as well.
Stile Wall: minimum 1/8” required for installation
Dogging: Electronic dogging is standard with motor technology – push bar stays retracted when dogged.
Fasteners: all provided
Cylinders: not provided. Install rim cylinder by others.
Specifications for Command Access CMAPD11-CVR-36-628-REX
Other Specs
Alternate CodesPD11-CVR-36-628-REX, PD11CVR36628REX
CategoryCommercial Electric Locks, CVR Exit Devices, Electric Locks, Exit Devices, Exit Devices & Exit Alarms, Glass Aluminum Hardware, Lock Sets, Narrow Style Electric Locks, Narrow Style Panic Devices, Standalone/Pushbutton Locks
