Corbin Russwin
The DC6000 series is an ideal closer for high-use openings or openings that must meet ADA requirements. Featuring internal advantages such as, double O-rings, a robust spring tube design and captured values, the DC6000 series delivers a reliable and consistent operation.
Features:
ANSI/BHMA A156.4, grade 1
DC6200: Multi-size spring power; adjustable 1-6. DC6400: sizes 1-6, half-size adjustability
Non-handed
Cast iron case with seamless cold headed steel spring tube
Standard forged steel arm
1-3/8″ diameter piston
Quick-Install mounting bracket standard
Allows door to swing 180° for regular, top jamb and parallel arm mounting (conditions permitting)
Standard mounting regular or top jamb. Parallel arm or try-style packaging specify DC6210 or DC6410
Self-drilling screws standard
Latching speed, closing speed and backcheck valves standard
Quick-Install mounting bracket speeds installation, reducing cost and errors
Painted or plated finishes
Captured valves assist in making closer tamper resistant
Metal cover optional
Heavy-duty arms offer increased strength for high-use, high-abuse situations
30-year limited warranty
Specifications:
Spring Power:
DC6200 closers: multi-sized; fully adjustable sizes 1 through 6.
DC6400 closers: sizes 1 through 6; half-size adjustability.
Handing: Non-handed (with the exception of some arms and accessories).
Body: Cast iron case with seamless cold-headed steel spring tube.
Arm: Standard: forged steel.
Spindle: Heat-treated steel with a crowned gear set for increased efficiency.
Piston: 1-3/8″ diameter; precision machined, heat-treated steel.
Springs: Chrome silicon wire.
Valves: Latching speed valve standard. Closing speed valve standard. Multiple backcheck location valve and backcheck intensity valve standard. Delayed action valve optional. Delayed action preset for 20 seconds. Between 90° and 70° for all mountings. To order specify M71.
Seals: “O” rings.
Fluid: Standard high lubricity extreme temperature hydraulic fluid.
Degree of Opening: Up to full 180° opening standard for regular, top jamb and parallel arm mountings, conditions permitting.
Power Adjustment Arm Bracket: 15% adjustment standard.
Cover: Standard: plastic V-O flame rated cover. Optional: full metal cover; specify M73 x hand.
Mountings: Standard: regular or top jamb. Parallel arm or tri-style packaging: specify DC6210 or DC6410. Optional mountings available.
Mounting Bracket: Quik-Install mounting bracket standard.
Fasteners: Standard: self-drilling screws. Optional: sex nuts and bolts (SNBs); Specify M54.
Corrosion Protection: Painted protective coating on all metal surfaces for use in corrosive environments.
Security Package: Includes heavy-duty parallel or regular arm, full metal cover and security Torx machine screws. Specify M87 x arm x hand.
Warranty: 30-year limited warranty.
Models:
DC6200, DC6400: Regular Arm
Most common mounting, providing the greatest closing efficiency.
Closer is mounted on the pull side, with the arm almost perpendicular to the face of the door.
Arm bracket is attached to the door frame.
DC6210, DC6410: Parallel Arm
Allows inside application of closer on out-swinging doors
Closer is mounted on the push side, with the arm parallel to the face of the door
Arm does not project from the opening
DC6220, DC6420: Top Jamb
Closer is mounted on the frame on the push side, with the arm perpendicular to the face of the door.
Arm bracket is mounted on the door.
Minimum 1-3/4″ (44mm) top jamb required.
Accommodates reveals up to 3-1/4″ (83mm).
DC6230, DC6430: Pull Side Track
Closer is top jamb mounted on the pull side; arm is connected to a door-mounted track.
Maximum degree of opening is 110°.
Maximum closing power is size 4.
Minimum 3″ (76mm) frame face required.
DC6240, DC6440: Push Side Track
Closer is mounted on push side of door; arm is connected to a stop-mounted track.
Maximum degree of opening is 110°.
Maximum closing power – size 4.
Door Closer Arms:
688F95 (Non-Hold Open)/688F77 (Hold-Open): Regular Arm
Used with regular arm mounting (pull side) and top jamb mounting (push side)
Non-hold open arm standard on the DC6200 and DC6400 closers
Hold Open arm optional, specify closer x A1
691F72 (Non-Hold Open): Deep Reveal Arm (3-3/8″ (86mm) – 7-1/4″ (184mm))
Accommodates top jamb mounting for reveals up to 7-1/4″ (184mm), depending on door and frame conditions
Mounted on push side
Available in painted or plated finishes
Optional on DC6220 and DC6420 closers
Non-hold open, specify closer x A6
Hold open, specify closer x A8
597F52 (Non-Hold Open Only): Heavy-Duty Regular Arm
Recommended for high-use, high-abuse environments
Tamper-resistant, solid forged steel riveted arm
Mounted on pull side
Not available in plated finishes
Optional on DC6200 and DC6400 closers, specify closer x A10
688F95 x 188F41 (Non-Hold Open)/688F77 x 509F49 (Hold Open): Parallel Arm
Mounted on push side
Non-hold open arm – combines regular arm with parallel arm mounting bracket
Available in painted or plated finishes
Hold open arm – combines regular hold-open arm with parallel arm mounting bracket
Non-hold open arm standard – order DC6210 or DC6410 series
Hold open arm optional, specify closer x A1
689F02 (Non-Hold Open)/689F01 (Hold-Open): Heavy-Duty Parallel Arm
Recommended for high-use, high-abuse environments
Tamper-resistant, solid forged steel riveted arm
Mounted on push side
Not available in plated finishes
Optional on DC6210 and DC6410 closers
Non-hold open arm, specify closer x A3
Hold open arm, specify closer x A2. Hold-open range 85° to 110°
For use with overhead stops, specify closer x A13
689F03 (Non-Hold Open)/689F04 (Hold-Open): Heavy-Duty Reversible Backstop Parallel Arm
Recommended for high-use, high-abuse environments
Tamper-resistant, solid forged steel riveted arm
Mounted on push side
Not available in plated finishes
Optional on DC6210 and DC6410 closers
Field-reversible steel lug restricts degree of opening to protect door, wall and hardware
Shipped standard as left hand. Handing can be reversed in the field
Non-hold open arm, specify closer x A4. Doorstop range 85° to 110°
Hold open arm, specify closer x A5. Door stop/hold open range 85° to 110°
Finishes:
USP/600 – Primed for painting
US3/605 – Bright brass, clear coated
US4/606 – Satin Brass, clear coated
US9/611 – Bright bronze, clear coated
US10/612 – Satin bronze, clear coated
US10BE/613E – Dark oxidized satin bronze-equivalent coated
US26/625 – Bright plated chrome
US26D/626 – Satin plated chrome
SBL/689 – Silver aluminum coated/sprayed
DBL/690 – Dark bronze coated/sprayed
LBL/691 – Light bronze coated/sprayed
FBL/693 – Black coated/sprayed
GBL/696 – Satin brass coated/sprayed
BSP – Black suede powder coated/sprayed
WSP – White suede powder coated/sprayed
Specifications for Corbin Russwin CORDC6210-689-M54
Other Specs
Alternate Codes103743, 460089, CORDC6210689, CORDC6210689-M54, DC2210689, DC6210689, DC6210-689-M54, DC6210689-M54, DC6210689M54
CategoryDoor Closers, Surface Mount Closers, Surface Mount Door Closers
Door ApplicationDoor Closers
FastenersSex Bolts
Finish Code689
Finish ColorAluminum Powder Coated, EN, Sprayed Aluminum
MountingParallel Arm (Pull Side)
SeriesDC6000
