Alarm Lock Systems Inc
PG21 Advanced Door Alarm Series from Alarm Lock are a quick and inexpensive solution when faced with security vulnerabilities from doors being propped open in schools, restaurants, stores nursing homes and theaters. Whether door-propping occurs for quick returns from taking “smoke” breaks, to permit insider-jobs or to allow unregistered visitors or contraband to circumvent main security entry points, it remains a problem for facility managers and security officers everywhere. These surface-mount, narrow stile microprocessor controlled door alarms quickly improve security at any single or double door with a 95dB alarm, entry delay, key-removal and auto-shutdown/reset options. The PG21 has two arming modes, standard mode or “always armed” mode and it enables multiple door monitoring with built-in external reed switch, has three entry delay options as well as selectable minute-shutdown. Available in Metallic Bronze or Silver models with optional bright strobe on top that lights brightly on alarm and can be easily seen across any room for pinpointing the door at issue. Typical applications include emergency fire escape doors, nursing home stairwell doors, rear restaurant and theater doors.
Features:
Improve security at any door and stops security vulnerability from doors propped open, for innocent and even felonious reasons in schools, nursing homes, restaurants, stores and theaters
Two selectable arming modes for security Door alarms and locks –
Always armed mode – when key is turned counter clockwise to the disarm position, the key cannot be removed. To remove key, turn back to arm mode, thus keeping unit armed always.
Standard security Door alarm arming mode – when key is inserted turning counter clockwise will disarm and key can be removed. Turning key clockwise will arm and key can be removed.
Status Indicator – The LED will indicate RED when armed
Long-life 9V battery (supplied), low battery alert
Entry Delay Time Options: Includes 15 seconds; 1 min. 15 sec. & 3 mins 15 sec.
For use on standard size and narrow stile doors, sleek model design key-activated door alarm
Sweeping Siren over 95db alarm &/or strobe
Unauthorized use of door causes alarm to sound and activates LED indicator &/or optional strobe
Options include continuous alarm, minute shutdown with auto reset and exit/entry delay
Uses standard mortise cylinder (not included)
Self contained and dual-tamper supervised
Continuous Power with the addition of external power supply
Multiple Door Monitoring permitted with external reed switches
Metallic silver or duranodic finish
Easy installation
For exterior key control, optional RIM cylinder may be used
PG21MSS/PG21MBS Optional strobe unit – include a highly visible amber strobe that flashes when unit goes into alarm
Programmable Features:
Four siren sounds
Four alarm modes for a variety of applications
Optional time delays
Long-life battery operated – approximately 2 ½ years
External power supply capability
Built-in door bell – requires button installation
Cover tamper protection – unauthorized removal triggers alarm
Key lock tamper – cover can not be removed without key
Multiple door monitoring – external reed/magnet switch contacts
Form-C Relay – connect to fire/burglary panel or other device
Annunciator feature – beeps when door opens
Two operating modes: Always armed or On/Off
Strobe feature – PG21MSS models only
Status Indicator
Ordering Information:
PG21MSS Metallic Silver finish with strobe
PG21MBS Metallic bronze finish with strobe
PG21MS Metallic Silver finish
PG21MB Metallic bronze finish
Accessories:
CEM Mortise cylinder for interior arming/disarming
CEM Rim cylinder for exterior arming/disarming
Battery Life 2 ½ years standby typical; 200 alarm sequences
PP100 Optional, continuous power supply (6-12V)
Specifications:
Dimensions: 11” x 2 1/2” x 2 3/8” (22.8cm x 6.3cm x 6.8cm) (LxWxD) (Length 11” with strobe, 9” without strobe)
Finish: Metallic silver or metallic bronze
Power Requirements: 9-volt alkaline batter (supplied), may also be used with PP100 (optional) or other power supply providing 9-12Vdc at 300mA. Internal battery may be used simultaneously with external power supply
Sounding Device: Piezo electronic sounder sweep siren, steady or pulsing, 110dB at 10 feet
Relay Contact: (Form-C) rated at 24VAC/DC at 1A (non-inductive)
Shipping Weight: 1 lb, 10 oz
Specifications for Alarm Lock Systems Inc ALAPG21MB
Other Specs
Alternate Codes100954, 707331, PG21MB
Battery Type9V Battery
CategoryExit Alarms, Exit Devices & Exit Alarms
CoverFull
Cylinder TypeMortise Cylinder, Rim Cylinder
Door ApplicationAlarms & Intercom
Egress Delay15 sec, 195 sec, 75 sec
Feedback95dB Dual Piezo Siren
Finish ColorBronze, Metallic
ManufacturerAlarm Lock Systems Inc
MaterialDie Cast
MountingSurface
Power Supply TypeBattery, External
Relay Amperage1A
Relay Number1 Relay
Relay TypeForm-C
SeriesPG21
