Notice: The info below is not item specific.
Command Access
PS220/220B – 110-120VAC input power supplies that deliver (2) amps @ 24VDC to (2) PTC fused outputs. (2) solid-state input triggers, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for solenoid & motor driven exit devices, electric locks, electric strikes, and mag locks.
Features:
Linear design insures ample inrush/hold current for latch retraction
Door mounted LED power indicator
Easy to remove euro connectors
Built to run up to 2 locks, exit trim & lp motor/solenoid kits
Robust solid-state outputs – protects system relays
Interruption free battery back-up
Models:
PS220: w/o battery back up.
PS220B: w/battery back up.
Specifications:
Input Voltage: 120 VAC, 60 Hz
Input Fuse: 2 Amp fuse @ 250VAC
Output Voltage: 2A @ 24VDC. 2 Solid state I/Oβs – 1 A auto resetting fused outputs. Power tap: .5A @ 24VDC. Over-voltage protection. Output voltage trim pot
Temperature range: 0 to 49Β° C; 32 to 120Β° F
Maximum humidity: 85%
Enclosure dimensions: PS220 (11β W x 11β H x 4β D). PS220B (13β W x 15.5β H x 5β D).
LEDβs: Red = A/C Power indicator. Green = D/C Output indicator. Orange = Battery output indicator
Specifications
Specifications for Command Access CMAPS220
Other Specs
Access TypePower Supply
Alternate CodesPS220
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
Size11″ x 11″ x 4″
Voltage24V DC
Manufacturer: Command Access | Part#: CMAPS220
Ordering note: Use Hot# 157551 when placing orders.