Notice: The info below is not item specific.
Altronix Power Supply/Charger
AL1024ULXB2 UL Listed Sub-Assembly power supply/charger converts 115VAC, 60Hz input into a single 24VDC non power-limited output. It also offers a suite of features that includes AC fail supervision, battery presence, and low battery supervision.
Specifications:
Input: Input 115VAC / 60Hz, 4.2A.
Output:
24VDC output (UL 1481).
8A continuous supply current with 10A supply current during alarm (UL 1481).
24VDC @ 10A (UL 294).
Filtered and electronically regulated output.
Maximum Ripple: 250mV P/P.
Short circuit and thermal overload protection.
Battery Backup:
Built-in charger for sealed lead acid or gel type batteries.
Maximum charge current 3.6A.
Automatic switch over to stand-by battery when AC fails.
Zero voltage drop when switched over to battery backup.
Supervision:
.
AC fail supervision (form “C” contacts).
Low battery and battery presence supervision (form “C” contacts).
Visual Indicators: AC input and DC output LED indicators.
Additional Features: Short circuit and thermal overload protection.
Electrical Temperature:
Operating: 0° C to 49° C (32° F to 120° F).
Storage: – 20° C to 70° C ( – 4° F to 158° F).
Relative Humidity 85% +/- 5%.
BTU/Hr (approx.): 123 BTU/Hr.
System AC input VA requirement: 483VA.
Specifications
Specifications for Altronix ALXAL1024ULXB2
Other Specs
Alternate CodesAL1024ULXB2
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
Manufacturer: Altronix | Part#: ALXAL1024ULXB2
Ordering note: Use Hot# 189076 when placing orders.
