Notice: The info below is not item specific.
Adams Rite Manufacturing
The DL100 Wireless Deadlatch seamlessly combines electrified locking hardware with access control system while working within standard aluminum stile entrance door preparations. Always operable from the inside via handle or paddle device. Entry via the integrated card reader or mortise cylinder. The standard fail secure DL100 Wireless motorized Deadlatch with form “C” latch status monitor and reader is powered by 2 AA lithium batteries. Units are equipped with a quick connect plug-in type connector. Interchangeable without stile modification for MS® Deadlocks or Adams Rite 4500 and 4900 Deadlatches. 1-3/4″ [44.5 mm] minimum door thickness required. Offers Real time DPS, tamper, REX and battery health monitoring and control with Support for HID multiCLASS SE and NFC/BLE mobile access card technologies.
Features:
All Models:
2.4 GHz Aperio wireless technology
Integrates with most existing access control systems and credentials
Audit trail limited by access control system
Battery operated
Deadlatch Features:
Non-handed
Fail secure operation (standard)
Factory configured Form C Latch status monitoring
Integrated locked state and tamper monitoring
Universal compatibility with any existing MS® door prep
Fully finished faceplate and strike plate
Tamper resistant
Features low energy EcoLatch® motorized actuator technology
Lock Backset: 31/32″ (24.6 mm), 1-1/8″ (28.6 mm), and 1-1/2″ (38.1 mm).
Case: Steel with corrosion-resistant plating. Measures 15/16″ x 5-13/16″ x depth (23.8 mm x 147.6 mm x depth). Depth varies by backset.
Latchbolt: Stainless steel. Measures 5/8″ x 1″ x 5/8″ (15.9 mm x 25.4 mm x 15.9 mm) throw.
Auxiliary Bolt: All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry. Faceplate Measures 1″ x 6-7/8″ (25.4 mm x 174.6 mm). Both flat and radius Faceplates are supplied. Flat Faceplates can also be adjusted in the field for right or left beveled edge doors.
Strike: Pick from optional Strikes. 4304 surface mounted strike for easy retrofits. Specify 4901-01 mortised-flush version when covering existing MS® deadlock preparation or for new applications. 4901-02 strike is available with radius profiles for pairs of doors and with extended lips of center-hung or thick door applications.
Options: DL100-DRK Door Repair/Retrofit Plate
Specifications:
Certifications:
UL 294 Listed – Indoor Rated
UL 294 Salt Spray Test Compliant
Tested to IP65 (Reader Only)
FCC Part 15 & Industry Canada Compliant
CE RED – Radio Equipment Directive – 2014/53/EU
Compatible Aperio Hubs: AH20, AH30, AH40
Environmental:
Operating Temperature (lock & reader): 14° to 140° F (-10° to 60° C)
Operating Humidity (lock & reader): 0 to 93% relative humidity on-condensing
Electrical:
(2) “AA” lithium batteries (included)
AA LR6 (1.5 V) lithium ion batteries required. Use of other types of batteries, such as alkaline, will significantly decrease battery life.
microUSB port for emergency power
Finishes:
313 – Dark Bronze Anodized
335 – Black Anodized
628 – Clear Anodized
Specifications
Specifications for Adams Rite Manufacturing ADRDL100-3201H-IPS-628
Other Specs
Alternate CodesDL100-3201H-IPS-628, DL1003201HIPS628
Backset1-1/8″
CategoryAccess Control, Prox Readers & Keypads (Wireless), Wireless
Credential TechnologyMultiClass SE + HID NFC Mobile Access
Door ApplicationAccess Control
Electrical OptionIncludes AH20 Hub
Finish CodeUS28
Finish ColorAluminum, Anodized Aluminum, Brushed Aluminum, Clear (Satin), Satin Aluminum
FunctionElectrified Deadlatch Paired with Reader
SeriesDL100
Strike Type4901 4-5/8in Mortised, Flat/Standard Jamb
Manufacturer: Adams Rite Manufacturing | Part#: ADRDL100-3201H-IPS-628
Ordering note: Use Hot# 189388 when placing orders.
