Notice: The info below is not item specific.
Napco Security Alarm
The GEM-PIR is an advanced PIR sensor designed for use with Napco’s GEM-series wireless receivers. The unit is powered by two 3-volt lithium batteries (supplied) for long service life. When battery voltage drops below normal, a low-battery report will be sent to the receiver (replace with Duracell DL123A or Varta/ power-one CR123A only). Coding switches are not used in the GEM-PIR. Each transmitter has a unique factory-programmed RF ID code (printed on the unit) that distinguishes itself to the receiver.
Features:
Signal selective processing for reliable operation
Unique circuit design protects against false alarms due to radio-frequency interference
Vertical and horizontal aiming capabilities
Dual-element sensor
Lens Bank of optional accessory lenses
Large lens area assures high sensitivity
Small size with ample wiring space
Corner mountable
Built-in tamper microswitch
Specifications:
PIR Coverage (l x w): 50′ x 50′ (15.2m x 15.2m) at 20°C (68°F), typical.
Operating Temperature: 0° to +50°C (32° to 122°F)
Mounting: Wall or corner, 10′ (3m) max.
Dimensions: 4.5” x 2.5” x 1.7” (11.4cm x 6.4cm x 4.3cm)(HxWxD)
Shipping Weight: 6.4oz (181gm)
Specifications
Specifications for Napco Security Alarm NAPGEM-PIR
Other Specs
Alternate Codes115697, GEM-PIR, GEMPIR
CategoryAccess Control, Alarms & Intercom, Burglar Alarms, Switches, Sensors & Contacts
Part TypeDetectors
StyleMotion Sensor
Manufacturer: Napco Security Alarm | Part#: NAPGEM-PIR
Ordering note: Use Hot# 115697 when placing orders.
