Schlage Electronic Security M490G Series
The M490G is a weather resistant electromagnetic gate lock with 1500lbs of holding force designed for use on all types of sliding and swinging gates. As a high security magnetic lock, it can accommodate misalignment problems while supplying superior holding force. A 1⁄2″ compression connector is provided for installation of 1⁄2″ EMT conduit, ensuring protection of hook-up wiring from weather and vandalism. Heavy-duty plating resists corrosion of mating surfaces, providing a low maintenance locking device. A modified top jamb mounting bracket allows a single M490G to be mounted in a variety of positions. The M490G gate lock may be mounted to any gate frame or post. Special brackets may be required to adapt the lock to a particular frame or post. It is important that the lock is mounted so that the armature pulls straight back from the magnet face. The M490G can be field configured for either 12 or 24 VDC operation. Magnetic bond sensor (MBS) and gate status monitor (DPS) are standard.
Features:
1500lb hold force rating
Magnetic bond sensor (MBS) and gate status monitor (DPS)
Field selectable 12 or 24VDC operation
Built-in voltage spike suppressor
Electroless nickel plated finish
Corrosion and weather resistant for exterior use
Universal mounting brackets for swinging or sliding gate applications
1⁄2″ EMT compression fitting protects hookup wires from weather and vandalism
Two foot wire leads
Accommodates gate misalignment
No moving parts – low maintenance
Limited lifetime warranty on magnetic coil assembly
ANSI/BHMA 156.23 Outdoor rated
Additional Features:
Magnetic bond sensor (MBS) monitors the strength of the bond between the lock and armature so you know the door is secure
Door position switch (DPS) monitors whether the door is open or closed
Universal mounting brackets for swinging or sliding gate applications
Built-in voltage spike suppression
1/2” EMT compression fitting
Special corrosion resistant plating
Specifications:
Holding Force: Meets or exceeds BHMA standard of 1500 lbs
Input Voltage (auto selected): 12/24 VDC
Current Draw (amps standard unit): .65A @ 12 VDC, .35A @ 24 VDC
Height: 3″
Length: 11″
Depth: 1-3⁄4″
Weight (approximate): 14 lbs
Certifications: ANSI/BHMA 156.23 Outdoor rated
Temperature: -31° to 151° F (-35° to 66° C)
Wire Gauge: 14-22 AWG
Specifications for Schlage Electronic Security SCEM490G-628
Other Specs
Alternate Codes490G 628, 490G628, M490G 628, M490G-628, M490G628, SCEM490G 628, SCHM490G 628
CategoryAccess Control, Gate Maglocks, Maglocks, Single Maglocks
CertificationsANSI, BHMA
Current Draw.35A @ 24 VDC, .65A @ 12 VDC
Door ApplicationMaglocks
GradeGrade 1
Height3″
Holding Force1500lbs
Length11″
Maglock TypeGate Lock, Single Maglock
ManufacturerSchlage Electronic Security
SeriesM490 Max Security
Voltage12, 24
Voltage TypeVDC – Direct
Weight14lbs
Width1-3/4″
