Notice: The info below is not item specific.
Lifesafety Power Inc
Mercury Unified Power systems combine system power, lock power and distribution alongside Mercury Security LP series access hardware in one compact and secure UL Listed solution. Solutions are available from 2 to 24 doors, in single or dual voltage, standard or network managed. MCLASS unified power systems combine Flexpower power modules alongside Mercury Security access hardware in one compact and secure UL listed solution. The FPO power supply / battery charger provides two power outputs user selectable for 12 or 24 VDC. One output provides continuous output power for system use, the second is resettable output power, activated when the fire alarm disconnect is initiated. For access or lock power, the D8P provides eight class 2 power limited outputs rated at 2.5A per output, each individually programmable for constant output or FAI disconnect. MCLASS enclosures are painted steel with removable backplate and include lock, two (2) keys and tamper switch.
Features:
FPO offline power supply:
120 or 230 VAC input
12 and 24 VDC outputs
On board fire alarm interface
Continuous and resettable DC
Auxiliary outputs:
Eight, Class II power limited at 2.5A each
Each programmable to either continuous or resettable DC
Expansion options:
Increased power, multiple voltages
Additional distribution outputs
Network monitoring and reporting
Labor saving design:
Pre-wired power section
Pre-punched knockouts
Removeable backplate simplifies installs
Pre-defined hole pattern for power section
Access panels mount on threaded standoffs – no drilling required
Additional benefits:
Wire management room
4.5″ enclosure depth fits battery set
Tamper switch, lock, dual key set standard
Mounting hardware for access boards included
Specifications:
Input Power:
Input 120/230 VAC 50/60 Hz | 83 Watts (0.69A)
Overload and short circuit protection
Over temperature protection
Polarized AC power supply disconnect
Output Power:
FPO75: 12V/6A or 24V/3A | 75 Watts
Outputs: Continuous (DC1) resettable (DC2)
8 auxiliary outputs, class II power limited rated at 2.5 Amps per output
120 mV output voltage ripple
System Efficiency: 83% | System BTU Rating: 33 BTU/Hr
Battery Charging:
Independent built-in 1A charger for sealed lead acid or gel type batteries
Microprocessor dual rate charging of 12 or 24 V battery sets
Charges up to 40Ah battery sets within UL limit
Automatic switchover to standby battery when AC fails
Zero voltage drop when switched over to battery backup
Supervision: AC Fail (form “C” contacts) System fail (form “C” contacts) may be triggered by low/no battery, short to earth ground and power supply failure
Visual Indicators:
AC input, DC1 and DC2 output
System fault | AC fault | short to earth ground | reverse battery polarity
Fire Alarm Input activated
D8P: DC outputs
Enclosure Dimensions: Size: 14.00H x 12.00W x 4.50D in. (35.00 x 31.00 x 11.50 cm) | Weight: 14 lbs
Specifications
Specifications for Lifesafety Power Inc LSIFPO75-D8PE1M
Other Specs
Alternate CodesFPO75-D8PE1M, FPO75D8PE1M
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
Manufacturer: Lifesafety Power Inc | Part#: LSIFPO75-D8PE1M
Ordering note: Use Hot# 200138 when placing orders.