Lifesafety Power Inc
The B100 secondary voltage module provides a means to easily and economically add an additional voltage to any Flexpower system. Primary power for the B100 is derived from an FPO power supply and the B100 steps the FPO voltage down to the user defined range (typically 12VDC). The B100 terminal block output is Class 2 power limited and jumper selectable for either a fixed 12VDC or an adjustable range between 5-18VDC at 4 amps maximum current. Multiple B100’s can be added to a system for virtually unlimited voltage combinations. The B100 is a perfect solution to the common problem of conjuring an economical dual voltage power system for an access control system. The B100 eliminates the need for a second power supply and cabinet to conjure a dual voltage system. By combining an FPO of appropriate size for 24V lock power and a B100 for 12V system power, all power components are located in one enclosure for efficiency of cost, space, interconnection, and the ability to use a single battery set for backup of both output voltages.
Features:
FlexConnect – Power supply and accessory board interconnection system uses common mounting footprints, predrilled mounting holes, snap-in standoffs, pluggable wires, and a dual buss distribution architecture to simplify installation and service.
Reliability – FPO power supplies are fully fault protected and feature fiberglass printed circuit boards to protect the electronics from water and other corrosive elements found in industrial settings. High efficiency design promotes low heat generation leading to longer service life.
GreenSmart – Flexpower systems are RoHs compliant, lead-free, and meet the latest state, federal and European requirements for energy efficiency.
Expansion – This module is typically part of an existing system or purchased to expand an existing system.
Fault Detection – A blown fuse or loss of output voltage will be detected and reported to the host FPO power supply.
OutSmart Visual Voltage Verification – Output LED changes color based on voltage setting (12V/green, 24V/blue)
Flexibility – This module may also be used to add multiple output voltages to an existing system that currently does not feature these functions. See the instruction manual or application notes for more information.
Functions:
Programmable Output Voltage:
Jumper selectable output voltage
12VDC fixed
5 to 18VDC user adjustable
4 Amps current at any selected voltage
On-Board Protection:
Over load protection
Short circuit protection
Over temperature protection
Fault Reporting (To Host Power Supply):
Abnormal operation
Voltage loss
Over current
Visual Indicators:
DC in/DC out and fault
Input and output LEDs indicate voltage by color (<15V green, >15V blue)
Benefits:
Adds an economical secondary 12V output to any 24VDC system
Provides the odd voltage required to power modems, routers and other IT or similar devices (ie., 5V, 9V, 15V etc)
Snap-in style mounting standoffs with fast-on connect cables for easy field installation
Eliminates need for a 12V battery set in dual voltage access power systems
Small size allows dual voltage in a smaller enclosure
Lifetime Warranty: High efficiency circuit of greater than 90% provides less heat generation leading to a longer service life and lower MTBF
Specifications:
Input Voltage (from FPO power supply): 12 or 24 VDC
Output Voltage (jumper select): 12VDC or 5-18VDC (user adjustable)
Output Current (Class 2 Power Limited): 4 Amps
Efficiency: 91%
Size: 4″ x 2.5″ x 1.5″
Weight: .25 lb.
Specifications for Lifesafety Power Inc LSIB100-BOXED
Other Specs
Alternate CodesB100-BOXED, B100BOXED
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
