Altronix Multi-Output Power Supply/Charger
AL300ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115VAC / 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices.
Specifications:
Input:
Input 115VAC / 60Hz, 3.5 amp.
Input fuse rated @ 3.5 amp/250V.
Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C. supervised trigger input and polarity reversal trigger input.
Output:
12VDC or 24VDC selectable outputs.
2.5 amp supply current.
Burglar Alarm Applications:
12VDC = 10VDC-13.2VDC
24VDC = 20VDC-26.4VDC
Five (5) PTC protected outputs, rated @ 2 amp.
Output relay energizes when unit is triggered (form “C” contact rated 1 amp @ 28VDC).
Filtered and electronically regulated output.
Short circuit and thermal overload protection.
Battery Backup:
Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
Maximum charge current 0.7 amp.
Supervision:
AC fail supervision (form “C” contacts).
Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
Low battery supervision (form “C” contacts).
Battery presence supervision (form “C” contacts).
Power fail supervision relay (form “C” contacts).
Visual Indicators:
AC input and DC output LED indicators (power supply board).
Red LEDs indicate condition of power outputs (multi-output board).
Power and input trigger LEDs (multi-output board).
Electrical:
Operating temperature: 0° C to 49° C ambient.
BTU/Hr.:
12VDC: 15.35 BTU/Hr.
24VDC: 30.71 BTU/Hr.
System AC input VA requirement: 402.5VA.
Mechanical:
Enclosure Dimensions (H x W x D approx.): 13.5″ x 13″ x 3.25″ (342.9mm x 330.2mm x 82.55mm)
Accommodates up to two (2) 12VDC/7AH batteries.
Product weight (approx.): 7.6 lbs. (3.45 kg).
Shipping weight (approx.): 8.6 lbs. (3.9 kg).
Specifications for Altronix ALXAL300ULM
Other Specs
Access TypePower Supply
Alternate Codes138506, AL300ULM, PIB1230ULM
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
Voltage/Amp Rating12 – 24V DC
