Notice: The info below is not item specific.
Alarm Controls Corporation
The SREX-100 is an active infrared request to exit sensor for interior applications located within the protected premise. It is U.L. listed as a request to exit device under the U.L. UL294 and the CAN/ULC-S319 standard. The SREX-100 is rated a “class 1” as per the CAN/ULC-S319 standard. The SREX-100 is designed to mount over the door header so that its detection pattern is placed directly over the door handle. When the user reaches for the door handle the exit device releases allowing the person to exit. The active detection curtain is well defined to keep the door secure while rejecting parallel traffic and objects placed under it.
Features:
Narrow activation zone is limited to door handle area (range 28″ to 48″)
Designed to eliminate cross-traffic activation
Cannot be deceived by placing objects under door
Immune to thermal changes
Adjustable time delay from 1 to 60 seconds
Built-in buzzer, can be silenced if required
Request to exit input, keypad or card reader input
Part of a continuum of Safer2Open™ low-touch and touchless door hardware solutions from ASSA ABLOY
Specifications:
Electrical:
Contact Rating: 2A contacts; rated at 1.3A at 30 VDC or 24 VAC
Current (mA): 155
Door Position Switch: Normally open dry contacts
Input Operating Voltage: 12 or 24 VAC or VDC, auto sensing
Switch: 1 DPDT- Double Pole Double Throw
Environmental:
Maximum Operating Temperature (F) : 120
Minimum Operating Temperature (F) : 32
Specifications
Specifications for Alarm Controls Corporation ACOSREX-100
Other Specs
Alternate CodesSREX-100, SREX100
CategoryAccess Control, Contacts & Sensors, Hardwired
Door ApplicationPushplates/Buttons & Switches
Manufacturer: Alarm Controls Corporation | Part#: ACOSREX-100
Ordering note: Use Hot# 156054 when placing orders.
