Notice: The info below is not item specific.
Command Access
PS210 – 110-120VAC input power supplies that deliver (1.5) amps @ 24VDC to (1) PTC fused output. (1) solid-state input trigger, protects system relays from shorts, grounds and surges. Its regulated linear design makes it a perfect match for electric locks, motor or solenoid driven exit devices, electric strikes, and mag locks.
Features:
Linear design insures ample inrush/hold current for latch retraction
Door mounted LED power indicator
Easy to remove euro connectors
Built to run up to 2 locks, exit trim & lp motor / solenoid kits
Robust solid-state outputs – protects system relays
Rock solid board design improves reliability
Models:
PS210: 1 Inputs/outputs w/out battery back up.
Specifications:
Input Voltage: 120 VAC, 60 Hz
Input Fuse: 2 Amp Fuse @ 250VAC
Output Voltage: 1.5A @ 24VDC. 1 Solid State I/O’s – 1.5A auto resetting fused outputs. Over-voltage protection. Output Voltage trim pot
Temperature range: 0 to 49° C; 32 to 120° F
Maximum humidity: 85%
Enclosure dimensions: PS210 (11” W x 11” H x 4” D).
LED’s: Red = A/C Power indicator. Green = D/C Output indicator
Specifications
Specifications for Command Access CMAPS210
Other Specs
Access TypePower Supply
Alternate CodesPS210
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
Size11″ x 11″ x 4″
Voltage24V DC
Manufacturer: Command Access | Part#: CMAPS210
Ordering note: Use Hot# 158084 when placing orders.
