Power Supply System, 6 Door Integrated Keyless and Mobile Access, Salto DV E2 75W, 2A/12V and 2A/24V , 8 Lock and 8 Aux Outputs, Three Salto Plates

$795.25

2 in stock

SKU: LSIFPO75-B100C8D8E2-3SL1 Category:

Notice: The info below is not item specific.
Lifesafety Power Inc
All-in-one power solutions for 4-10 door Salto systems using CU42E0, CU4200, or CU4EB8 controllers. Single, dual voltage/Networked. Salto unified power systems offers maximum flexibility, functionality and savings to access system designers. Salto Unified enclosures are engineered to house Flexpower boards in one compact, secure system.
Features:
FPO offline power supply:
120 or 230 VAC input
12 and 24 VDC outputs
On board Fire Alarm Interface
Continuous and resettable DC
Distributed output module:
Eight auxiliary – fused at 3A each
Eight lock control – fused at 3A each
Expansion options:
Increased power, multiple voltages
Additional distribution outputs
Network monitoring and reporting
Labor saving design:
Pre-wired power section
Pre-punched knockouts
Preinstalled brackets hold three SALTO modules
Flexible backplate mounting locations
Access panels mount on threaded studs – no drilling required
Additional benefits:
Wire management room
4.5″ enclosure depth fits battery set
Tamper switch, lock, dual key set standard
Mounting hardware for access boards included
Specifications:
Input Power:
Input 120/230 VAC 50/60 Hz | 83 Watts (0.69A)
Overload and short circuit protection
Over temperature protection
Polarized AC power supply disconnect
Output Power:
2A@12V and 2A@24V DC, 75W maximum combined output power
Outputs: Continuous (DC1) Resettable (DC2)
8 controlled outputs, fused at 3A each
8 auxiliary outputs, fused at 3A each
120 mV output voltage ripple
System Efficiency: 83% | System BTU Rating: 33 BTU/Hr
Battery Charging:
Independent built-in 1A charger for sealed lead acid or gel type batteries
Microprocessor dual rate charging of 24 V battery sets
Automatic switchover to standby battery when AC fails
Zero delay when switching over to battery backup
Supervision: AC Fail (form “C” contacts) System fail (form “C” contacts) may be triggered by low/no battery, short to earth ground and power supply failure
Visual Indicators:
AC input, DC1 and DC2 output
System fault | AC fault | Short to earth ground | Reverse battery polarity
Fire alarm input activated
B100: DC input/output and fault
C8: DC output and fault
D8: DC output
Enclosure Dimensions: Size: 20.00H x 16.00W x 4.50D in. (50.00 x 40.00 x 11.50 cm) | Weight: 18 lbs

Specifications

Specifications for Lifesafety Power Inc LSIFPO75-B100C8D8E2-3SL1
Other Specs
Alternate CodesFPO75B100C8D8E23SL1, FPO75-B100C8D8E2-3SL1
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies

Manufacturer: Lifesafety Power Inc   |   Part#: LSIFPO75-B100C8D8E2-3SL1

Ordering note: Use Hot# 196197 when placing orders.