Access Power Controller Board Only, Output 12/24VAC/DC, (8) 2.5 Amp Outputs Class 2 Rated PTC Protected Power-Limited, Auto-Resettable, FAI Fire Alarm Interface, Input: 115VAC, LED Visual Indicators, BC400 Enclosure

Altronix

ACM8CBE converts one 12 to 24 volt AC or DC input into eight independently controlled class 2 rated PTC protected power-limited auto-resettable outputs rated at 2.5A each. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an access control system, card reader, keypad, push button, PIR, etc. ACM8CBE will route power to a variety of access control hardware devices including mag locks, electric strikes, magnetic door holders, etc. Outputs will operate in both fail-safe and/or fail-secure modes. This unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two totally independent power sources, one providing power for board operation and the other for lock / accessory power. The FACP Interface enables emergency egress, alarm monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight outputs.

Specifications:

• Input Voltage: 12 to 24 VAC or VDC operation (setting not required), 0.6A @ 12V, 0.3A @ 24V current consumption with all relays energized. Main fuse is rated at 10A/250V.
• Trigger Inputs:
• Eight access control system trigger inputs:
• Eight normally open (NO) inputs.
• Eight open collector sink inputs.
• Any combination of the above.
• Input Options: One common power input (board and lock power). Two isolated power inputs (one for board power and one for lock/accessory power).
• Outputs:
• Eight independently controlled class 2 rated PTC protected power-limited auto-resettable 2.5A outputs:
• Eight fail-safe and/or fail-secure power outputs.
• Eight auxiliary power outputs (unswitched).
• Output Ratings: Output PTCs are rated 2.5A each.
• Indicators (LED):
• Red LEDs: Outputs are triggered (relays energized).
• Green LED: FACP disconnect is triggered.
• Physical and Environmental:
• Dimensions (HxWxD): 15.5″(393.7mm) x 12″(304.8mm) x 4.5″(114.3mm).
• Product Weight: 8.35 lbs. (3.8 kg).
• Temperature:
• Operating: 0°C to 49°C (32°F to 120°F).
• Storage: – 20°C to 70°C (- 4°F to 158°F).
• Relative Humidity: 85% +/- 5%
• BTU/Hr. (approx.): 4 BTU/Hr.