Notice: The info below is not item specific.
Altronix Power Supply/Charger
AL1024ULX is a power supply/charger that converts a 115VAC 60Hz input into a single 24VDC non power-limited output.
Specifications:
Input:
Input 115VAC, 60Hz, 4.2 amp.
Input fuse rated @ 3.5 amp/250V.
Output:
24VDC output.
10 amp of continuous supply current for Access Control applications.
8 amp of continuous supply current for Fire Alarm applications.
Filtered and electronically regulated output.
Short circuit and thermal overload protection.
Battery Backup:
Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
Maximum charge current 3.6 amp.
Supervision:
.
AC fail supervision (form “C” contacts).
Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
Low battery supervision (form “C” contacts).
Battery presence supervision (form “C” contacts).
Visual Indicators:
AC input and DC output LED indicators.
Electrical:
Operating temperature: 0° C to 49° C ambient.
122.84 BTU/Hr.
System AC input VA requirement: 483VA.
Mechanical:
Enclosure Dimensions (H x W x D approx.): 15.5″ x 12″ x 4.5″ (393.7mm x 304.8mm x 114.3mm)
Accommodates up to two (2) 12VDC/12AH batteries.
Product weight (approx.): 10.1 lbs. (4.58 kg).
Shipping weight (approx.): 11.4 lbs. (5.17 kg).
Specifications
Specifications for Altronix ALXAL1024ULX
Other Specs
Access TypePower Supply
Alternate CodesAL1024ULX
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
Voltage/Amp Rating24V DC
Manufacturer: Altronix | Part#: ALXAL1024ULX
Ordering note: Use Hot# 146908 when placing orders.
