Power Supply, Converts One (1) 12 to 24 VAC or VDC Input Into Four (4) Independently Fuse Outputs.

Altronix

The ACM4E converts one 12 to 24 VAC or VDC input into four independently controlled fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an access control system, card reader, keypad, push button, PIR, etc. ACM4E will route power to a variety of access control hardware devices including mag locks, electric strikes, magnetic door holders, etc. Outputs will operate in both fail-safe and/or fail-secure modes. Units are designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two totally independent power sources, one providing power for board operation and the other for lock / accessory power. The FACP Interface enables emergency egress, alarm monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four outputs.

Specifications:

• Input: 12 to 24 volt AC or DC operation (setting not required), (0.4A @ 12volt, 0.2A @ 24 volt current consumption with all relays energized).
• Output: Four (4) fail-safe and/or fail-secure power outputs. Four (4) dry form “C” 5A rated relay outputs. Any combination of the above
• Visual Indicators: Red LEDs indicate outputs are triggered (relays energized). Green LED indicates FACP disconnect is triggered.
• Temperature: Operating 0 to 49° C (32 to 120° F ). Storage – 20 to 70° C ( – 4 to 158° F).
• Dimensions (HxWxD): 8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm)
• Product Weight: 3.4 lb. (1.55 kg)