Access Power Controller w/ Power Supply/Charger, Output 24VDC 10 Amp, (8) 2.5 Amp Outputs Class 2 Rated PTC Protected Power-Limited, Circuit Breaker with Auto-Resetting, FAI Fire Alarm Interface, Input: 115VAC, LED Visual Indicators, BC400 Enclosure

Altronix

The ACMCB series distribute and switch power to access control systems and accessories. They convert a 115VAC, 60Hz input into eight independently controlled 12VDC or 24VDC class 2 rated power-limited PTC protected outputs. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an access control system, card reader, keypad, push button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag locks, electric strikes, magnetic door holders, etc. Outputs will operate in both fail-safe and/or fail-secure modes. The FACP Interface enables emergency egress, alarm monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight outputs.

Specifications:

• Input Voltage: 115VAC, 60Hz
• Outputs: Class 2 rated power-limited PTC protected outputs (auto-resettable).
• Voltage: 12VDC or 24VDC
• Current: Varies, depending on the model.
• Protection: PTC 2.5A.
• Auxiliary: 3.5A (unswitched).
• Other: Overvoltage protection. Filtered and regulated outputs.
• Back-up Battery: (not included)
• Capacity:
• 12AH/12VDC (1 or 2 within enclosure).
• 18AH/12VDC (requires larger “J” enclosure).
• 40 AH/65 AH (requires separate enclosure).
• Type: Sealed lead acid or gel type.
• Fuse Rating: 15A @ 32VDC. (AL600ULACMCB(J) does not have a battery fuse.)
• Failover: Upon AC loss, instantaneous.
• Fire Alarm Disconnect: Latching or non-latching, individually selectable for any or all of the eight (8) outputs.
• Supervision:
• AC Failure: Form “C” contacts (rated 1A @ 28VDC).
• Battery: Form “C” contacts (rated 1A @ 28VDC).
• Indicators (LED):
• Input: 115VAC is present.
• DC Output: Powered.
• Battery: Discharged or not connected.
• Relays: Individual LEDs indicate outputs are triggered (relays energized).
• FACP: Indicates FACP disconnect is triggered.
• Physical and Environmental:
• Enclosure Dimensions (HxWxD): 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)
• Product Weight: 11.75 lb. (5.33 kg)
• Temperature:
• Operating: 0°C to 49°C (32°F to 120°F).
• Storage: – 20°C to 70°C (- 4°F to 158°F).
• Relative Humidity: 85% +/- 5%